Descargar Imprimir esta página

Evenflo Trio Manual Del Usuario página 20

Publicidad

FIG. 29
Instalación del asiento de niño para el automóvil
mirando hacia adelante. Grupo 2 (15-25 kg)
Installing the car seat in a front-facing position
Asegúrese de que el arnés de la silla de automóvil esté desmontado
antes de comenzar la instalación en el vehículo.
Consulte el capítulo "Desmontaje del arnés".
Coloque la silla de automóvil sobre el asiento trasero del vehículo
con sentido mirando hacia el frente y siente al niño en la silla.
Tire del cinturón de seguridad del vehículo hasta que esté totalmente
destensado. Pase el cinturón de seguridad a través de las aberturas
de la carcasa y de la cubierta de la silla de automóvil (fig. 31). Tire
del cinturón de seguridad y hágalo pasar por las aberturas opuestas
de la cubierta y la carcasa (fig. 32).
Make sure that you have removed the harness of the car seat before
starting the installation. Follow the instructions in the section entitled
'Removing the harness'.
Place the car seat in a front-facing position on the rear passenger
seat of your vehicle and sit your child in the car seat. Pull on the seat
belt until it is completely loose. Thread the seat belt through the
openings on the side of the shell and cover of the car seat (fig. 31).
Pull on the belt and threaded through the openings on the opposite
side of the shell and cover (fig. 32).
FIG. 31
(Gr. 2, from 15 to 25 kg)
18
FIG. 30
FIG. 32

Publicidad

loading