Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR LAWN MOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
AUTO STOP PLUG
The auto stop plug can be used to maintain your preferred
deck height cutting position or as a deck lift lockout when
removing the cutting deck. See the Maintenance section for
more information on removing the cutting deck.
BLADE ENGAGE KNOB
Pull the blade engage knob up to activate the mower's cut-
ting blades. Push the knob down to stop the cutting blades.
BLADE SPEED BUTTON
Press the blade speed button to increase or decrease the
speed of the blades.
BRAKE PEDAL
The brake pedal is used for stopping the mower in an emer-
gency situation or when parking.
CHARGER
The mower's charger has a key hole hanging feature for
convenient, space saving storage. When hanging by the
keyhole slots, use at least one additional screw in the hole
in the mounting flange to secure in place. Always mount
in such a way that the charger's LED status light is visible
while charging.
CRUISE CONTROL BUTTON
The cruise control button allows you to continue forward at
a set speed without needing to press the accelerator pedal.
DECK HEIGHT ADJUSTMENT LEVER
The deck height adjustment lever is used to raise or lower
the cutting deck. Set the auto stop plug at your normally
desired cutting height for ease of use when mowing.
DRIVE SPEED BUTTON
Press the drive speed button to limit the speed of the mower
when you're operating in tight spaces or on slopes. This
setting is also useful for inexperienced users when they are
first learning to operate the mower.
HEADLIGHT BUTTON
Turn the headlights on and off using the headlight button.
LCD SCREEN
The LCD screen monitors and activates many of the features
on the mower.
FEATURES
PARKING BRAKE
Use the parking brake to lock the mower in the braked position.
POWER SWITCH WITH START KEY
The power switch is used to turn the mower on and off. The
start key must be inserted before the switch can be oper-
ated. When the key is in the ON position, the power switch is
also used to power optional manufacturer-approved mower
accessories.
REVERSE MODE BUTTON
Press the reverse mode button to allow the mower to cut
when maneuvering in the reverse direction. The blades will
disengage if mower is operated in reverse without pressing
the reverse mode button.
NOTE: The blade engage knob must also be pulled up for
mowing to occur when maneuvering in reverse.
SEAT ADJUSTMENT LEVER
Use the seat adjustment lever to move the seat to the desired
position.
STORAGE COMPARTMENTS
Two storage areas with USB ports offer a convenient place
to store your cell phone or MP3 player.
USB PORT
The USB/USB-C charging port provides charging power of
5 volts DC at up to 2 amps for your cell phone, MP3 player,
or other USB devices. Consult the owner's manual for your
device for specific charging requirements.
Connect one end of a USB cable (not provided) to your
device and the other end to the USB charging port on the
mower, to begin charging your device.
NOTICE:
Attempting to charge devices rated more than 2 amps
could damage the USB charging port and/or the mower.
Always close the USB cover when not in use to prevent
debris from becoming trapped in port.
NOTE: The USB port is only powered when the start key is
in the ON position.
WARNING:
Never use headphones or any electronic device, such
as a smart phone or tablet, while operating the mower.
Distracted operation can result in an accident that could
result in death or serious personal injury to the operator
or a bystander.
12 — English
Publicidad
