Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING THE CUTTING DECK
See Figures 14 - 16.
If desired, the cutting deck can be removed from the mower
to make accessing the blades easier when changing.
WARNING:
Wear heavy gloves at all times while handling the cutting
deck. Keep hands and fingers clear of pinch points.
„ Move the mower to a level surface. Make sure the blade
engage knob is down.
„ Stop the motor, remove the start key, and set the park-
ing brake.
„ Move the deck height adjustment lever to the deck re-
lease position.
„ Disconnect the power cables that connect the cutting
deck to the mower.
NOTE: The RYRM8006 will have two power cables and
RYRM8007 will have three.
„ Pull the deck release handle out and rotate toward the
back of the mower.
„ Repeat on the opposite side of the mower.
„ Lift the deck and slide forward to detach the deck clip
from the J-hook.
„ Slide the deck out from under the mower.
„ Reverse the process to reattach the cutting deck to the
mower.
NOTE: Reconnect two power cables for the RYRM8006
and three for the RYRM8007.
MAINTENANCE
DECK
RELEASE
Fig. 14
20 — English
CABLE
2x
Fig. 15, RYRM8006
CABLE
3x
Fig. 15, RYRM8007
Publicidad
