Volvo Penta Neutra-Salt Instrucciones De Montaje página 9

VPA 47702052 11-2011
50108
50105
50109
4. Install rocker switch on control panel. A "SNAP"
sound will confirm when rocker switch is securely
seated in hole.
5. Install decal (4), PN 7741899, on control panel,
near switch.
Electrical Connections
NOTICE! Harnesses must be routed so they do not
contact any moving parts. Avoid sharp edges that will
cut or wear the wires.
1. At the rocker switch (11), connect harness (5),
PN 3862489. Connect the lead with the female
blade terminal to one of the blade terminals on the
switch (A).
2. Using a test light, find a source of 12V power that
is only powered when the engine is running.
Connect the lead (B) that has the ring terminal to
this power source.
3. Make sure fuse is in place and secure fuse
holder (C) where it will be easily accessible.
7