ATH-Heinl Single Lift 12PL Manual De Instrucciones página 78

Mounting the platforms
Lift the lift truck into the first safety notch (approx. 500 mm) and mount the platforms with the drive-on ramps.
Hydraulics
The hydraulic hoses are already mounted.
Note
Tighten all hydraulic connections and make sure that no moving parts can damage the
hydraulic hoses.
Fill up the hydraulic oil to the mark on the dipstick.
Bleed the hydraulic circuit by lowering the lift completely and pressing the Lower button for approx. 15
seconds more.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
78
Release date: 02.05.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG