Femi Job Line TR 1030-DB Manual De Instrucciones página 31

CAUTION:
Besides following the instructions mentioned in this manual, when using electric equipment you
must always observe all safety precautions to prevent risk of fire, electric shock and personal
injury.
Read this instruction manual before use and keep it carefully.
Working with power tools can be dangerous if you do not follow suitable safety measures. As for any electric
machine with moving parts, the use of a tool entails some risks. If you use the machine as prescribed in this
manual, you pay careful attention to the work you are doing, you observe the regulations and you use the
suitable personal devices of protection, you can reduce the probability of risk. The possible remaining risks are
related to:
1. electrical shock due to direct or indirect contact with electrical parts
2. injuries due to contact with moving parts
3. injuries due to contact with angular, sharp parts or while changing the disk
4. injuries due to the ejection of tool parts or of the material you are processing
5. injuries due to noise
6. injuries due to dust
7. injuries due to the fact that the tool has been not assembled correctly
The probability of risk can be reduced by the safety equipment of the machines, as for example the protections,
the blade case, the clamping, the stoppage and the personal protection devices as protective goggles, the dust
mask, ear plugs, protective shoes and gloves. However, even the best protection devices cannot protect you
from the risks due to lack of good sense and attention. Have always good sense and observe the necessary
precautions. Carry out only the works that you consider safe. DO NOT FORGET: everyone is responsible for
his safety.
This tool has been designed for specific purposes. Femi recommends you not to modify it or use it for purposes
different from the ones for which it has been manufactured. If you have any doubts regarding specific
applications, do not use the machine before having contacted us and received our instructions.
PERSONNEL AUTHORIZED TO USE THE MACHINE
This machine has been designed and manufactured to be used by qualified personnel with adequate training,
experience and skills. Below you will find a list of basic requirements:
Operators / Trainees / Apprentices:

may be male or female

must be aged 14 or over

must have full use of both hands

must have no physical or mental disabilities

must know and fully understand the contents of the user manual.
EN
SAFETY INSTRUCTIONS
READ AND KEEP THIS MANUAL
29