Stihl RMA 460.0 V Manual De Instrucciones página 18

English
1
► Open the side discharge shield (1) and hold it in position.
► Swing the chute (2) upwards and lift it away.
► Close the side discharge shield (1).
7.5 Fitting and Removing the Blade
7.5.1 Attaching the Blade
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Upend the lawn mower.
1
2
► Place new washer (1) on new bolt (2).
► Apply Loctite 243 or Loctite 242 thread locker to the
thread of bolt (2).
► Position blade (3) so the raised areas on the contact area
engage in the notches in blade (3).
16
2
3
3
2
4
► Screw in bolt (2) together with washer (1).
► Block blade (3) using a piece of wood (4).
► Tighten bolt (2) to 35 Nm.
7.5.2 Removing the Blade
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Upend the lawn mower.
1
2
► Block blade (1) using a piece of wood (2).
► Unscrew bolt (3) and remove together with washer (4).
► Remove blade (1).
► Discard bolt (3) and washer (4).
Use a new bolt and washer to attach blade (1).
7 Assembling the Lawn Mower
1
4
3
0458-818-9921-A