Publicidad
Idiomas disponibles
Idiomas disponibles
1. Press the safety lever (12);
2. Press the drive lever (11) and the drive shaft (18) starts
to turn;
3. When you release the drive lever, the drive shaft
automatically stops.
To engage the drive shaft
1. Press the reverse gear lock (22) and the reverse gear
lever simultaneously (23);
2. Press the safety lever (12) and the drive lever (11);
3. When the gear shift lever is engaged, the gearbox
actuates the drive shaft;
4. When you release the gear shift lever, the drive shaft
stops.
When reversing, keep the safety distance and hold
the handlebar firmly so as to avoid stumbling and
the machine running over you.
1. The gear shift lever (8) must be handled when the drive
lever is loose;
2. The gear shift lever allows you to select three positions
according to the desired operation mode: 0, 1 and 2;
3. After setting the speed, press the drive lever (11) and the
drive shaft starts rotating.
Start-up movement can be quite abrupt. Hold the
handlebar firmly.
To stop the drive shaft
With the throttle knob (24), it is possible to adjust the
combustion engine rotation speed.
Adjust it according to the desired speed. Left positioned, it
is stopped. Right positioned it is at maximum speed.
In the event of an emergency
To stop the engine, press "OFF", from the "ON/OFF" switch
(10).
Emergency stop
Engine stop
Under normal operation
1. Release the drive lever (11) and set the gear shift lever
(8) to neutral position "0";
2. Set the throttle adjustment knob to the left;
3. Press "OFF", from the "ON/OFF" switch;
4. Close the fuel tap (4).
-
+
Publicidad
