Publicidad
Idiomas disponibles
Idiomas disponibles
Safety and operating instructions
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury
or death. Be aware of excess hose left on the
walking or work surface.
• Proceed with care in unfamiliar surroundings. Be
aware of potential hazards created by your work
activity.
• Torque arms are not insulated from coming
into contact with electric power sources and are
not intended for use in potentially explosive
atmospheres.
DO NOT DISCARD – GIVE TO USER
Useful information
Log in to Atlas Copco www.atlascopco.com
You can find information concerning our products,
accessories, spare parts and published matters on
our website.
Spare parts
Parts without ordering number are not delivered
separately for technical reasons.
The use of other than genuine Atlas Copco
replacement parts may result in decreased tool
performance and increased maintenance and may, at
the company option, invalidate all warranties.
Warranty
Contact the Atlas Copco sales representative within
your area to claim a product. Warranty will only
be approved if the product has been installed,
operated and overhauled according to the operating
instructions delivered with the tool.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning Safety and operating
instructions, Exploded views and Service
instructions.
ServAid facilitates the ordering process of spare
parts, kits, service tools and accessories for the
product of your choice, and is continuously updated
with information of new and redesigned products.
You can use ServAid to present content in a specific
language, provided translations are available, and
to display information about obsolete products.
ServAid offers an advanced search functionality of
our entire product range.
ServAid is available on DVD and on the web.
Contact your Atlas Copco sales representative
or email servaid.support@se.atlascopco.com for
further information.
4
EN
General properties
Atlas Copco torque arms are an excellent means
of assistance when using electric or pneumatic
screwdrivers and nutrunners. They stress relieve the
operators arm, wrist and shoulder from vibration,
torque and weight during repeated actions.
Even at a modest level of exertion repeated actions
can lead to severe disorders.
As an additional advantage the Atlas Copco torque
arms also make savings on the tool accessories e.g.
bits, taps etc. due to entering the screw or the hole
more in right angle.
Torque arms in the SML series have a large working
range and are exceptionally easy to position and
handle. The design is intended for heavy duty
operations over a long period of time.
Tool torque should not exceed the specified torque
range of each specific arm.
Installation
(See page 83).
Torque arm attachment
The torque arm base should be fixed on a
A
perfectly horizontal bench by 3 screws (not
supplied).
The horizontal arm is fixed by 4 screws.
B
Choose the clamp orientation and tighten the
C
screws 1 and 2.
1. Attach the tool to the tool clamp on the tool
D
2. Tighten the screws at the recommended
(*) See the tool user manual.
1. Set the balancer to make the use easy for the
E
2. The tool can be connected to the power
Maintenance
Grease bushings on the arms yearly.
When disposing of components, lubricants,
etc ... ensure that the relevant safety
procedures are carried out.
© Atlas Copco Tools - 9836 5567 00
clamp area (*).
torque (*).
operator.
supply.
SMS
Publicidad
