Allen-Bradley MicroLogix 1100 Instrucciones De Instalación página 10

10 MicroLogix™ 1100 Programmable Controllers
ATTENTION
ATTENTION
Mounting Dimensions
Dimension
A
B
C
Publication 1763-IN001A-MU-P - May 2005
Vertical mounting is not supported due to thermal
considerations.
Be careful of metal chips when drilling mounting holes for
your controller or other equipment within the enclosure or
panel. Drilled fragments that fall into the controller could
cause damage. Do not drill holes above a mounted controller
if the protective debris strips have been removed.
C
A
1763-L16AWA, 1763-L16BWA, 1763-L16BBB
1763-
L16AWA
90 mm (3.5 in.)
110 mm (4.33 in.)
87 mm (3.43 in.)
B
L16BWA L16BBB