Controller Spacing
The controller mounts horizontally, with the expansion I/O extending to the right
of the controller. Allow 50 mm (2 in.) of space on all but the right side for adequate
ventilation, as shown below.
DIN Rail Mounting
The maximum extension of the latch is 14 mm (0.55 in.) in the open position. A
flat-blade screwdriver is required for removal of the controller. The controller can
be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails. DIN rail mounting
dimensions are shown below.
Dimension
A
B
C
MicroLogix™ 1100 Programmable Controllers
Side
ESC
ESC
Height
90 mm (3.5 in.)
27.5 mm (1.08 in.)
27.5 mm (1.08 in.)
Top
OK
OK
Bottom
Publication 1763-IN001A-MU-P - May 2005
11
B
A
C