Allen-Bradley MicroLogix 1100 Instrucciones De Instalación página 8

8 MicroLogix™ 1100 Programmable Controllers
Catalog Description
Number
Input
Power
1763-L16AWA 120/240V ac
1763-L16BWA 120/240V ac
1763-L16BBB 24V dc
(1)
The 4 high-speed inputs (inputs 0 through 3) can be used for pulse latching or higher speed counting. Refer to Input
Specifications on page 24 and the MicroLogix 1100 Instruction Set Reference Manual, publication 1763-RM001, for more
information.
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or
non-hazardous locations only. The following WARNING statement applies to use in
hazardous locations.
WARNING
Publication 1763-IN001A-MU-P - May 2005
Digital
Inputs
(10) 120V ac
(6) 24V dc
(4) high-speed
(1)
24V dc
(6) 24V dc
(4) high-speed
(1)
24V dc
EXPLOSION HAZARD
• Substitution of components may impair suitability for Class
I, Division 2.
• Do not replace components or disconnect equipment
unless power has been switched off.
• Do not connect or disconnect components unless power
has been switched off.
• This product must be installed in an enclosure. All cables
connected to the product must remain in the enclosure or
be protected by conduit or other means.
• All wiring must comply with N.E.C. article 501-10(b).
Analog Digital
Inputs Outputs
(2) voltage input (6) relay
All individually
0 to 10V dc isolated
(2) voltage input (6) relay
All individually
0 to 10V dc isolated
(2) voltage input (2) relay (isolated)
(2) 24V dc FET
(2) high-speed
0 to 10V dc 24V dc FET
Comm.
Ports
(1) RS-232/485
combo
(isolated)
(1) Ethernet
(1) RS-232/485
combo
(isolated)
(1) Ethernet
(1) RS-232/485
combo
(isolated)
(1) Ethernet