Descargar Imprimir esta página

Pioneer MVH-A215BT Manual De Instrucciones página 16

Av receptor rds

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic operation
Description of AUX screen
TIPS
• Touch anywhere on the screen, the touch panel keys appear.
• You can set the screen size for the video image (page 21).
Switches between the video input and audio input.
Settings
You can adjust various settings in the main menu.
Displaying the setting screen
1
Press
.
2
Touch
.
3
Touch one of the following categories, then select the options.
System settings (page 16)
Theme settings (page 18)
Audio settings (page 19)
Video settings (page 20)
Bluetooth settings (page 7)
System settings
The menu items vary according to the source.
[AV Source Settings]
Menu Item
Description
[Radio settings]
(page 12)
[Bluetooth Audio]
Setting Bluetooth audio source activation.
[On] [Off]
16
En
[AUX Input]
Menu Item
Description
[AUX Input]
Set to [On] for AUX source (page 15).
[On] [Off]
[Camera settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 10).
NOTE
To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 16).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
Description
[Back Camera Input]
Setting rear view camera activation.
[Off] [On]
[Camera Polarity]
Setting the polarity of the rear view camera.
[Battery]
The polarity of the connected lead is positive.
[Ground]
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].

Publicidad

loading