Descargar Imprimir esta página

Pioneer MVH-A215BT Manual De Instrucciones página 20

Av receptor rds

Publicidad

Idiomas disponibles

Idiomas disponibles

Menu Item
Description
[Time Alignment]
Select or customise the time alignment settings to reflect
[Front Left] [Front Right]
the distance between the listener's position and each
[Rear Left] [Rear Right]
speaker. You need to measure the distance between the
[Subwoofer] [Listening
head of the listener and each speaker unit.
1
Position]
Touch
select the alignment speaker.
2
Touch
selected speaker and listening position.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
[Bass Boost]
Adjust the bass boost level.
[0] to [+6]
[Rear Speaker Output]
Select the rear speaker output.
[Rear] [Subwoofer]
NOTE
This function is available when the source is off.
[Loudness]
Compensates for deficiencies in the low-frequency and
[Off] [Low] [Mid] [High]
high-frequency ranges at low volume.
NOTE
This function is not available while you make or receive a call using
the hands-free function.
Adjusting the cutoff frequency value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Front, Rear, Subwoofer.
NOTE
[Subwoofer Settings] is available only when [Subwoofer] is [On].
1
Press
.
2
Touch
then
.
3
Touch [Crossover] or [Subwoofer Settings].
4
Touch
or
to switch the speaker.
5
Touch
or
to set the cutoff position.
6
Touch
or
to set the cutoff slope.
The following items can also be set.
20
En
or
to select the listening position then
or
to input the distance between the
Switches the subwoofer phase between normal and reverse position.
Switches the LPF/HPF setting to [On] or [Off].
LPF/HPF
Video settings
The menu items vary according to the source.
[Time Per Photo Slide]
Menu Item
Description
[Time Per Photo Slide]
Select the interval of image file slideshows on this product.
[5sec] [10sec] [15sec]
[Manual]
[Video Signal Setting]
Menu Item
Description
[AUX]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to an AUX equipment.
M] [PAL-N] [SECAM]
[Camera]
Select the suitable video signal setting when you connect
[Auto] [PAL] [NTSC] [PAL-
this product to a rear view camera.
M] [PAL-N] [SECAM]
Favourite menu
Registering your favourite menu items in shortcuts allows you to quickly jump to the
registered menu screen by a simple touch on the [Favourites] screen.
NOTE
Up to 12 menu items can be registered in the favourite menu.
Creating a shortcut
1
Press
then touch
.
2
Touch the star icon of the menu item.

Publicidad

loading