Publicidad
Idiomas disponibles
Idiomas disponibles
Menu Item
Description
(custom)
Displays the screen to customise the illumination colour.
To customise the defined colour, touch
or
to adjust the brightness and the level of red, green
and blue to create favourite colour.
To store the customised colour in the memory, touch and
hold [Memo], and the customised colour will be available
at the next illumination setting by pressing
TIP
You can also adjust the colour tone by dragging the colour bar.
(rainbow)
Shifts gradually between the preset colours in sequence.
[Theme]*
Select the theme colour.
* You can preview the top menu screen or the AV operation screen by touching [Home] or [AV]
respectively.
Audio settings
The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
Menu Item
Description
[Graphic EQ]
Select or customise the equaliser curve.
[S.Bass] [Powerful]
Select a curve that you want to use as the basis of customising
[Natural] [Vocal] [Flat]
then touch the frequency that you want to adjust.
[Custom1] [Custom2]
TIPS
• If you make adjustments when a curve [S.Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equaliser curve settings
will be changed to [Custom1] mandatorily.
• If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [Custom1] and [Custom2] curves can be created common to all sources.
[Fader/Balance]
Touch
[Front] and [Rear] to [0] when using a dual speaker system.
Touch
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
then touch
.
or
to adjust the front/rear speaker balance. Set
or
to adjust the left/right speaker balance.
Menu Item
Description
[Source Level Adjuster]
Adjust the volume level of each source to prevent radical
[-4] to [+4]
changes in volume when switching between sources other
than FM.
Touch
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
[Subwoofer]
Select enable or disable subwoofer output from this
[On] [Off]
product.
[Speaker Level]
Adjust the speaker output level of the listening position.
1
[Front Left] [Front Right]
Touch
[Rear Left] [Rear Right]
select the output speaker.
2
[Subwoofer] [Listening
Touch
Position]
level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Rear Speaker Output].
[Crossover]
Select a speaker unit (filter) to adjust the HPF or LPF cut-off
frequency and the slope for each speaker unit (page 20).
[Subwoofer Settings]
Select the subwoofer phase, LPF cut-off frequency and the
slope (page 20).
[Listening Position]
Select a listening position that you want to make as the
[Off] [Front-L] [Front-R]
centre of sound effects.
[Front] [All]
or
to adjust the source volume after
or
to select the listening position then
or
to adjust the selected speaker output
19
En
Publicidad
