Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OVERVIEW
The petrol hammer is a tool designed for performing demolition and chiselling works in natural stone, artifi cial stone, marble, etc.
using insertion work tools. The hammer is powered by a combustion engine, which ensures the possibility of working in places
where no electricity has been supplied. The correct, reliable and safe operation of the tool depends on its proper use, therefore:
Read and keep the entire instructions manual before the fi rst use of the product.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
specifi ed in this instructions manual.
EQUIPMENT
The product is delivered complete but requires certain preparatory actions described in further sections of the instructions manual.
TECHNICAL PARAMETERS
Parameter
Catalogue No.
Weight
Fuel tank capacity
Impact frequency
Single impact energy
Tool holder
Engine
number of cylinders
number of strokes
cooling
Sparking plug type
Engine displacement
Engine power
Maximum engine rotational speed
Maximum engine rotational speed (no load)
Rotational speed at rated power
Max. fuel consumption
Noise
sound pressure L
± K
pA
power L
wA
Vibration level (front / back handle)
The declared total vibration emission value and declared noise emission value have been measured using the standard test
method and can be used to compare one tool to another. The declared total vibration emission value and declared noise emission
can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is
used.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual con-
ditions of use (including all parts of the work cycle, such as the time when the tool is turned off or idle and the activation time),
must be specifi ed.
GENERAL SAFETY WARNINGS
Warning! Read and view all safety warnings, fi gures, and specifi cations supplied with the device. Failure to do so may
result in electric shock, fi re, or serious injury.
IMPORTANT. Read carefully before use. Keep for future reference.
Whenever the following term appears in the description: "device", it should be regarded as a "petrol hammer".
Keep all warnings and instructions for future reference.
O R I G I N A L
12
EN
Unit
[kg]
[l]
[min
-1
]
[J]
[cm
]
3
[kW]
[min
-1
]
[min
-1
]
[min
-1
]
[l/h]
[dB (A)]
[dB (A)]
[m/s
2
]
I N S T R U C T I O N S
Value
YT-82138
11
1.3
3200
30 - 35
SDS MAX
1E44F-E
1
2
Air cooling
L8RTC
51.7
1.3
6000
7000 ± 300
6000
0.6
84.0 ± 3.0
105
10.76 ± 1.5 / 18.39 ± 1.5
Publicidad
