HQ-Power MICW41 Manual Del Usuario página 4

b. Frequency / Channel Selection
Press SET until you see the display as below.
Wait 2 to 3 seconds. You will now be able to choose between the channel mode and the frequency mode.
Choose one of the modes using ▲ or ▼ and select the frequency / channel. Press SET to confirm.
c. Setting the Setup Lock
Press SET until you see the display as below.
Choose whether you want to lock the present status or not by using ▲ or ▼. Press SET to confirm.
8. The Microphone (2 pcs included)
a. Inserting the Batteries
Make sure the microphone has been switched off. To do so, hold the power button on the bottom of the
microphone pressed for 2 seconds.
Press and pull the bottom cap (order code MICW46) of the microphone.
Open the microphone by twisting the microphone head from the bottom
part. Make sure not to remove the element protection grille.
Insert 2 x AA batteries respecting the polarity. Reassemble your
microphone.
b. Description
1. power button
2. built-in transmitter
3. condenser and protection grille
4. battery cover
5. power indicator: a flashing LED means the batteries are
low – replace the batteries (see "8.a. Inserting the
Batteries")
6. ▲▼ buttons – selection buttons
7. SET – menu setting and confirmation button
MICW41_v2 4 HQPOWER