HQ-Power MICW41 Manual Del Usuario página 5

c. Use
Open the microphone as you would to insert the batteries (see "8.a. Inserting the Batteries").
Press the power button to switch on your microphone. Press SET to select the desired menu. Press SET to
enter the menu, adjust the value with ▲ or ▼ and press again SET to confirm.
Set up your microphone in the same manner and at the same values as your receiver (i.e. same channel [or
frequency) for the best results. Your microphone‟s setting can also be locked or unlocked (Loc OFF or loc on).
9. Optional Accessories
a. Body-Pack Transmitter (order code MICW43)
1. antenna
2. input jack
3. LCD
4. battery compartment
5. power switch
6. ▲▼ buttons – channel / frequency selection
7. SET button
8. battery compartment
9. volume control
10. HI / LO
Open the battery compartment and insert 2 x AA batteries (order code LR6C, incl.) respecting the polarity.
Insert the plug of the optional microphone (order code MICW44 or MICW45, not incl.) into the input jack.
Switch on the transmitter by sliding the power switch to ON. Press SET to select the desired menu. Press SET
again to enter the menu, adjust the value with ▲ or ▼ and press SET again to confirm.
Set up your transmitter in the same manner and at the same values as your receiver (i.e. same channel or
frequency) for the best results. Your transmitter‟s setting can also be locked or unlocked (Loc OFF or loc on).
b. Headset Microphone (order code MICW44)
c. Lavalier Microphone (order code MICW45)
MICW41_v2 5 HQPOWER