Intended Use - WIKA DIH10-Ex Manual De Instrucciones

3. Safety

3.2 Intended use

The model DIH10-Ex connection head with integrated digital display
module (digital display) is an all-purpose, configurable loop-powered
indicator for single resistance thermometers (RTD), thermocouples (TC)
EN
and resistance and sensor transmitters.
It can be used especially where a standard signal of 4 ... 20 mA is
already available. The current loop display is built into an appropriate
connection head and can thus be used as a local display in all sectors
of industry. The cases are not constituent elements of the EC-type
examination certificate.
The DIH10-Ex is intrinsically safe and designed for use in hazardous
areas.
This is class A equipment for emissions and is intended for use in
industrial environments. In other environments, e.g. residential or
commercial installations, it can interfere with other equipment under
certain conditions. In such circumstances the operator is expected to
take the appropriate measures.
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be taken
out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
WIKA operating instructions model DIH10-Ex 9