Safety; Explanation Of Symbols; Intended Use - WIKA 910.70 Manual De Instrucciones

3. Safety

3. Safety

3.1 Explanation of symbols

EN

3.2 Intended use

The model 910.70 indicator is an accessory and displays the measured values of an
electrical sensor with a 4 ... 20 mA output signal on a dial. The case of the indicator is
designed for panel mounting.
The indicator offers an optional output signal for 4 ... 20 mA.
The indicator has been designed for industrial applications in indoor and outdoor areas.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
Only use the instrument in applications that lie within its technical performance limits
(e.g. max. ambient temperature, material compatibility, ...).
→ For performance limits see chapter 9 "Specifications".
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
Handle electronic precision instruments with the required care (protect from humidity,
impacts, strong magnetic fields, static electricity and extreme temperatures, do not
insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
6
WARNING!
... indicates a potentially dangerous situation that can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to property or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient
and trouble-free operation.
WIKA operating instructions indicator for panel mounting, model 910.70