Personnel Qualification; Skilled Personnel; Special Hazards - WIKA DELTA-comb DPGS40TA Manual De Instrucciones

2. Safety

2.4 Personnel qualification

EN

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical
training, knowledge of measurement and control technology and on their ex-
perience and knowledge of country-specific regulations, current standards and
directives, are capable of carrying out the work described and independently
recognising potential hazards.

2.5 Special hazards

14
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
The activities described in these operating instructions may only
■
be carried out by skilled personnel who have the qualifications
described below.
WARNING!
For hazardous media such as flammable or toxic gases or liquids,
and refrigeration plants, compressors, etc., in addition to all stan-
dard regulations, the appropriate existing codes or regulations must
also be followed.
WARNING!
Residual media in dismounted measuring instruments can result in
a risk to persons, the environment and equipment.
Take sufficient precautionary measures.
WARNING!
The maximum surface temperature of the instrument may
not exceed the ignition temperature of flammable media.
Take sufficient precautionary measures.
WIKA operating instructions DPGS40TA with component testing