Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Crank
TECHNICAL DATA
Output profile: external square
Output profile size, metric: 25 mm
Output profile size, imperial: 1"
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This Torque Multiplier Set is made for loosening and tightening of screws and nuts.
The mechanical advantage in the use of your torque multiplier is derived from the planetary
transmission within the gear head of the tool. Due to frictional losses in the gear train, a torque loss
factor of 10% to 20% should be anticipated.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Torque Multiplier
2
Torque multiplier
Torque max.: 3200 Nm
Gear ratio: 1:56
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1230-1
3
Extension bar
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
