Nanosonics trophon2 Manual Del Usuario página 10

Cannot be transported by air
freight
Environmental Conditions:
Operating temperature range
for the trophon2 device: 17 °C
to 27 °C / 62.6 °F to 80.6 °F
Start up from sleep
Menu
A1.2: Warnings
Hot Temperatures

Do NOT touch surfaces in the internal chamber. They can be hot and cause burns.

Ensure the probe is correctly positioned in the chamber. See C3.3 Positioning the Probe for
correct positioning of probe.
Malfunctions

Do NOT attempt to open the chamber door during a cycle, power failure or system malfunction.

All repairs must be carried out by authorized service providers.
Transporting the trophon2 device
Follow your facility's manual handling procedures for guidance on lifting heavy objects.

The trophon2 device weighs approximately:
Unpackaged 22 kg (48.5 lb).
Packaged 25 kg (55 lb).

If your trophon2 device has been used, purge the trophon2 device before transportation to remove
the trophon Sonex-HL. (See SECTION E2: Purge Cycle).
Electrical Device

Use the power cable supplied with the trophon2 device, connect to an earthed power outlet with
the correct voltage and frequency as specified on the product and in Appendix 1: trophon2 Device
Technical Specifications N05000-2. Incorrect voltage can damage the product.
Integrated Probe Positioning Guide
10
L03192 3.0 06/2022
Wear Gloves
®
AcuTrace RFID Zone
Cycle Start