dBTechnologies INGENIA IG2T Manual Del Usuario página 55

English
BUILD SYSTEM MENU
This menu automatically configures the system
according to the number of speakers, to the presence
or absence of a subwoofer, as well as to the location
and inclination of the speakers. It consists of 3 sub-
menus:
• SYSTEM CHECK
• SYSTEM STRUCTURE
• SYSTEM TYPE
SYSTEM CHECK
The system can detect, through infra-red communication (the communication ports
are installed on the speaker handles and detection is automatic) whether the user is
using one or two IG2T speakers. After accessing this screen:
1. Turn the rotary encoder selecting
encoder.
2. After a short animation, the system automatically switches to the next menu (SYSTEM STRUCTURE).
3. If this operation doesn't need to be performed, select and confirm
screen, select and confirm
SYSTEM STRUCTURE
The menu allows to manually update the configuration of the system in use,
adding or removing one or more subwoofers. If you need to update the number of
connected subwoofers:
1. turn the rotary encoder, select the "subwoofer" item and confirm it
2. select and confirm the number of subwoofers you want to use
3. select and confirm
CHECK sub-menu
INGENIA IG2T
Selfcheck System, then confirm the choice by pressing the push rotary
BACK
NEXT to switch to the next menu; select and confirm
Build System Menu
NEXT; if you need to return to the main
BACK to return to the SYSTEM
Cod. 420120238 REV. 1.1
Sub-menus
55