dBTechnologies INGENIA IG2T Manual Del Usuario página 60

SYSTEM COVERAGE MENU
For information about the functions contained in this menu, only displayed
if during SYSTEM CHECK the system has automatically detected 2 speakers,
also refer to paragraph "DIGITAL
EXAMPLES" section. This menu allows to change the emitted wave beam
and the relevant acoustic coverage, once the DSP has recognized the
installation of 2 IG2T speakers:
• UP +10° for an installation requiring an acoustic coverage from
the bottom up, with mounting on stand or subwoofer and with as
much inclination as possible.
• UP +5° to orientate the wavefront with a medium upward
inclination, with mounting on stand or subwoofer
• UP +2.5° to get an acoustic coverage with a slight upward
inclination.
• FAR 0° when you want a coverage getting as far as possible,
when speakers are installed in front of the auditorium, at the height
of the audience.
• DOWN -2.5° to be used to orientate the acoustic coverage
slightly downward (for example with the public not very far from the
speakers and flown installation).
• DOWN -5° for a directivity with a medium downward inclination
(for example with public close to the speakers and flown
installation).
• DOWN -10° to incline the acoustic coverage as downward as
possible (public very close to the speakers and flown installation).
INGENIA IG2T
60
STEERING" in the "INSTALLATION
English
System Coverage Menu
Cod. 420120238 REV. 1.1