dBTechnologies INGENIA IG2T Manual Del Usuario página 62

OPTIONS MENU
PASSWORD
(ON/OFF and code selection)
1. ON/OFF (select and confirm whether you
wish to enable/disable the password-protection
of settings).
2. PASSWORD (by selecting and confirming this
item you can specify an alphanumeric password,
consisting of up to 6 digits/characters).
SUPERUSER PASSWORD
If you forget the password, use the code: Q2R5D9
to unlock the system.
CONTRAST
1. Select and confirm to adjust the OLED display contrast, with an increase in brightness
ranging between 0 and 100% and a resolution of 5%.
STAND-BY
(Enabling/disabling of automatic power-off and choice of the time period)
1. ON/OFF (select and confirm whether you wish to enable/disable the timed stand-by of
the control panel).
2. PASSWORD (by selecting and confirming this item you can specify a time period after
which the control panels switches to stand-by mode, ranging between 0':10'' – 10':00 and
with a resolution of 10'').
RESTORE
1. Select and confirm to restore the factory settings.
INFO
1. Select and confirm to display the information about the latest firmware version loaded into
the system.
EXIT
1. Select and confirm to exit the OPTIONS menu.
INGENIA IG2T
62
Options Menu
Cod. 420120238 REV. 1.1
English