Tripp-Lite PDU3V6H50A Manual Del Propietário página 3

Installation
Mounting the PDU
Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are
designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact
mounting configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the
PDU are included. Use only the screws supplied by Tripp Lite, or their exact equivalent.
1-1
Attach the mounting
brackets to the PDU.
1-1
1-4
To install the PDU with its outlets facing
the rear of the rack, use the included
PDUMVROTATEBRKT accessory. First,
attach the mounting button
V-shaped bracket
screw and washer. Then, use the
button-mount slot to attach the bracket
to the PDU and the mounting button to
attach the PDU to the rack. The bracket
effectively repositions the mounting
brackets, allowing for the PDU outlets to
face the rear of the rack.
1-5
If your PDU cannot be mounted
using the toolless mounting option,
the mounting brackets can be used.
Attach the PDU to a vertical rail in
your rack or rack enclosure. (Use the
mounting hardware that came with your
rack or rack enclosure to attach the
mounting brackets to the rail.)
20-09-045-933145.indb 3 20-09-045-933145.indb 3
1-2
(Optional) Attach the
cord retention
bracket(s) to the PDU.
1-2
to the
A
using the included
B
3
1-3
For toolless mounting,
position the PDU as
desired in the rack
enclosure, align the
buttons with the rack
mounting slots, and
slide the PDU into
position.
1-3
A
1-4
1-5
B
10/7/2020 11:55:09 AM 10/7/2020 11:55:09 AM