Attaching The Panel Cover - Sony BDV-F700 Manual De Instrucciones

Attaching the panel cover

After connecting the cables, organize them and attach the panel cover by following the Steps below.
1
Place the unit on its face.
Note
• Make sure to place the unit on a soft thick cloth to prevent damaging the unit.
2
Bring together the cables (except the FM wire antenna (aerial)), thread them through the
gap on the bottom of the unit, and then draw them around the rear support (A).
A
3
Thread the AC power cord (mains lead) through the gap on the bottom of the unit by
securing it behind the tabs, and then draw it around the rear support (B).
4
Bundle the cables and the speaker cords with the cable tie.
28
GB
B
Tabs
Cable tie (supplied)