PRESIDENT PM-2010 WP Manual Del Usuario página 47

Attaching the Battery Pack
1. Place the battery pack onto the
back of the radio. It will only fit in
one way.
2. Snap the battery release clip
until it clicks. Be sure the battery
pack fits tightly against the PM-
2010 WP's body.
Attaching the Beltclip
1. Hold the beltclip in the direc-
tion as follows.
2. Apply it to the hanger piece on
the back of the radio. Then slid it
up.
3. You will hear a click. The
beltclip is firmly attached.
4. To take the beltclip off the ra-
dio, turn it and slid it up.
47