Dirt Devil BLACK LABEL MC52 Manual De Instrucciones página 16

3 Maintenance and care
3.2 Cleaning / changing the exhaust filter
41
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see ZChapter 3.4, 'Spare parts and
accessories' for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
unlocking mechanism (Fig. 45) and only release it once the exhaust fil-
ter cover is in its limit position.
3.3 Cleaning the turbo brush
46
3.4 Spare parts and accessories
You can order accessories and spare parts as follows:
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
Ordering address: ZPage 54, 'International Service'
16
42 43
47
44
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Unlock the exhaust filter cover as shown (Fig. 41).
4. Unlock the exhaust filter by pulling the removal tab to the side (Fig. 42).
5. Tap the dirt out of the exhaust filter over a dustbin.
6. Finally, remove the dirt from the exhaust filter with a soft brush, e.g. the
furniture brush supplied with the appliance (Fig. 43).
7. Press the exhaust filter back into its console until the removal tab audi-
bly engages (Fig. 44).
8. Attach the exhaust filter cover at the bottom first.
9. Lock the exhaust filter cover (Fig. 45).
48
The following accessories and spare parts can be reordered:
Item number
5550001 Filter set consisting of:
1 motor protection filter (Fig. 34)
1 exhaust filter (Fig. 43)
M203-5 1 parquet brush
M219 1 mini-turbo brush "Fellino"
M221 1 midi-turbo brush
M232 1 long flexible crevice nozzle
M234 1 large upholstery nozzle
click!
45
49
Description