Using Bluetooth ® devices
Bluetooth is a short-range wireless radio communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected
without cables and communicate with each other.
• Refer to pages i and ii at the end of the manual to check the countries where you may use the
Bluetooth® function.
This unit supports the following Bluetooth profiles
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• PBAP (Phonebook Access Profile) 1.0
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.3
To use a Bluetooth device with this unit, connect the supplied USB Bluetooth Adapter (KS-UBT1)
to one of the USB input terminals of the unit. Once the USB Bluetooth Adapter is attached, this
unit is always available for pairing.
• KS-UBT1 is initially connected to the USB cable from the rear of this unit.
• Only one USB Bluetooth Adapter can be detected at a time.
• Refer also to the instructions supplied with the Bluetooth device.
Additional information
• If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc.), stop your car in
a safe place.
• Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
• If you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the circumstances around you.
• If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call
conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
• When the unit is turned off, the device is disconnected.
• If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/index.html> (English website only).
ENGLISH
11