Yard force YF22-3N1SPVS-SC Manual De Uso Y Cuidado página 11

As shown in Fig. 7
1. The grass bag comes partially assembled. Make sure the frame handle is outside of the bag top.
2. Slip the vinyl bindings over the frame.
ATTACHING THE GRASS BAG TO THE MOWER
As shown in Fig. 8
NOTE: Never install or remove the grass bag, mulching plug or side discharge chute while the
engine is running.
1. Lift the rear chute flap with one hand and hook in the grass bag, make sure the mulch plug be removed.
2. Release the rear chute flap to secure the grass bag in position.
INSTALLING THE MULCHING PLUG
As shown in Fig. 9
1. Remove the grass bag.
2. Push the plastic mulching plug into the discharge chute until it is locked in position.
3. Release the rear chute flap. It will close back to cover the mulching plug.
INSTALLLING THE SIDE DISCHARGE CHUTE
Hotline: 1-866-902-9690
ASSEMBLY
Fig. 7
Fig. 8
Grass bag
Fig. 9
Mulching plug
11