ims PRO PULSEMIG 320 C Manual De Instrucciones página 44

Warning: Increasing the length of the torch or return cables beyond the maximum length specified by the manufacturer will increase the risk of
electric shock.
TIG/GTAW PROCESS SETTINGS
• The TIG DC is dedicated to the flow of ferrous metals such as steel, stainless steel, but also copper and its alloys and titanium.
• The Synergic TIG no longer works on the choice of a DC current type and the settings of welding cycle parameters, but integrates experience-based
welding rules/synergies. This mode therefore restricts the number of settings to three basic settings:
- The type of material.
- The thickness to be welded.
- The welding position.
Settings
Standard
Pulsed
Spot
Tack
Type of materials
Diameter of the Tungsten
electrode
Trigger mode
Constant energy welding
Energie
TIG DC WELDING / GTAW
• TIG DC Standard
The TIG DC Standard welding process allows high quality welding on most ferrous materials such as steel, stainless steel, but also copper and its
alloys, titanium... The many possibilities of current and gas management allow you to perfectly control your welding operation, from the priming to
the final cooling of your weld bead.
Settings Designation
Pre-gas
Starting current
Starting time
Rising current
Welding current
44
Adjustable
Designation
settings
Smooth current -
Pulse current -
Smooth poin-
-
ting
Pulse pointing -
Fe, Al, etc.
1 - 4 mm
2T - 4T -
4TLOG
Hold
Thermal coeff.
Adjustable
settings
0 - 60 secs.
10 - 200 %
0 - 10 secs.
0 - 60 secs.
10 - Imax
PULSEMIG 320 C
TIG
TIG DC
Synergic
-
-
-
-
- Choice of the material to be welded
Choice of electrode diameter. Allows to refine HF priming
currents and synergies.
Choice of trigger welding management mode.
Constant energy welding mode with correction of arc length
-
variations
- See chapter «ENERGY MODE» on pages following.
Torch purge time and to protect the area with gas before ignition
This current treshold at the start is a phase before the current upslope.
Up slope current.
Welding current.
Recommendations
Description & advice
EN