GENERAL INVERTER FEATURES – WH1000i
7
1 - Control Panel: Contains the reset breaker,
outlets and warning lights.
2 - Spark Plug Access Cover: Remove the
cover to service the spark plug.
3 - Recoil Handle: Pull to start the engine.
4 - Engine/Fuel Control Switch: Turns the
engine and the fuel on and off.
1
2
3
4
5
6
Figure 5
5 - Fuel Cap and Vent: Open the vent to run the
engine and close the vent when the engine is off.
6 - Engine Service Panel: Remove the panel to
access the engine for maintenance.
7 - Muffler and Spark Arrestor: Avoid contact
until the engine is cooled down. The spark
arrestor prevents sparks from exiting the
muffler. It must be removed for servicing.
FEATURES
15