Publicidad
Idiomas disponibles
Idiomas disponibles
MENUS FOR DETAILED ADJUSTMENT
34
EN
●
The following menu settings can be changed only
when the Power Switch is set to "REC".
●
The DISPLAY settings except "BRIGHT" and
"LANGUAGE" are effective only for shooting.
[ ] = Factory-preset
BRIGHT
pg. 17, "Brightness Adjustment Of The
Display"
CLOCK ADJ.
pg. 16, "Date/Time Settings"
LANGUAGE
/
/
/ [ENGLISH] / FRANÇAIS /
ESPAÑOL / PORTUGUÊS
The language setting can be changed.
(
pg. 16)
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
●
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote
control. (
pg. 23, 42)
ON SCREEN
LCD: Keeps the camcorder's display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder's display
appear on screen when the camcorder is
connected to a TV.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording.
DISPLAY
pg. 20)
(
DEMO MODE
OFF: Automatic demonstration will not take
place.
[ON]: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after "DEMO
MODE" is turned "ON".
●
With "DEMO MODE" set to "ON", if there is no
operation for about 3 minutes after the Power
Switch is set to "REC".
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
"DEMO MODE" remains "ON" even if the
camcorder power is turned off.
[ ] = Factory-preset
QUALITY
[FINE] / STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
modes are available: FINE (
STANDARD (
) (in order of quality).
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (
REC SELECT
[
(TAPE)]: When Snapshot recording is
performed with the VIDEO/MEMORY Switch set
to "VIDEO", still images are recorded only onto
the tape.
/
(TAPE/CARD): When Snapshot
recording is performed with the VIDEO/
MEMORY Switch set to "VIDEO", still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels).
DSC
) and
pg. 26)
Publicidad
