Seca 959 Manual De Instrucciones Y Garantía página 68

Tare off additional
weight (TARE)
68 •
2. Fold the armrest toward the back in order to make
it easier for the patient to sit down.
3. Make sure that the scale has no load.
4. Switch the scale on.
5. Ask the patient to sit down on the scale.
6. Fold the footrests down.
1.
2.
7. Pull the footrests down until they stop.
8. Ask the patient to put his feet on the footrests.
9. Fold the armrests down.
10. Read the measurement result.
You can use the TARE function to prevent the weighing
result from being affected by an additional weight (e.g.
a towel or pad on the weighing surface).
ATTENTION!
Incorrect measurement with force shunt
If an additional weight (e.g. large towel) is in
contact with the surface on which the scales
are standing, the weight will not be measured
correctly.
– Make sure that any additional weight is only
placed on the weighing surface of the scales.
1. Switch the scale on.
2. Place the additional weight on the scales.