Garland CHOPPER 555 VE Manual De Instrucciones página 35

4. MACHINE DESCRIPTION
4.1. CONDITIONS OF USE
This machine is for domestic use and is designed for cutting logs up to 30 cm in diameter (*) and a
maximum of 55 cm in length (*), with the ends cut perpendicular to the axis of the trunk by shears due to
pressure generated by a hydraulic piston that applies the blade to the trunk. Any other use could be dangerous to
you, people, animals and things that are around and can damage the machine. The use of this machine for other
than the designed operations may result in dangerous situations.
Use this machine outside, in dry environments and in temperatures between 5°C and 45°C.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer is in no way liable for damages caused by improper or incorrect use of this machine.
4.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Upper carrying handle
2. Vertical travel control lever
3. Control lever
4. Motor
5. Main column
6. Oil tank / air vent cap
7. Wheel
8. Work table
9. Base
10. Blade
11. Protection
12. Claw
13. Switch / Plug
14. Protection arches
Images and drawings in this manual are approximate and may not correspond with the actual product.
1
14
3
7
35/120
2
4
6
English
10
13
12
11
8
5
9