OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
1.Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once.
1) Press "
2) Turn "
" to adjust the hour figures, the input time should be within
0--23.
3) Press "
4) Turn "
" to adjust the minute figures, the input time should be within
0--59.
5) Press "
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
in one minute, the oven will exit the setting.
2. Microwave Cooking
Press "
"once, "P100" displays. Then turn "
you want.
Press "
Press "
" to start cooking.
Example: If you want to use 80% power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press "
" once, the LED will display "P100",
"
" indicator will be lighted.
2) Turn "
" to choose 80% power, the LED will display "P80".
Press "
3) Turn "
" to adjust the cooking time until the oven display"20:00"
(The maximum cooking time is 95 minutes.)
4) Press "
"
" indicator will flash (Buzzer will sound five times after finishing).
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1
min
1---5
min
5---10 min
Microwave Power Chart
Microwave Power
"
, the hour figures will flah.
", the minute figures will flash.
" to finish clock setting. ":" will flash.
" to confirm the [power.
" to confirm power.
" to start cooking, ":" will light and the
: 5 seconds
: 10 seconds
: 30 seconds
100%
80%
GB
"to select the function
Turn "
10---30 min
30---95 min
50%
30%
13
" or no operation
" to adjust the cooking time.
: 1 minute
: 5 minutes
10%