GreenWorks Tools 22147T Manual De Instrucciones página 14

c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Battery tool use and care
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will make sure that the safety of the power tool is
maintained.
(Original instructions)
Additional power tool safety warnings
Warning! Additional safety warnings for hedge
trimmers
• Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material. A moment of
inattention while operating the tool can result in serious
personal injury.
• Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce possible
personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring. Cutter
blades contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an electric
shock.
• Keep cable away from cutting area. During operation
the cable can be hidden in shrubs and can be accidentally
cut by the blade.
Training
Provide the following instruction:
Become familiar with the owner's manual before attempting to
operate the equipment.
Preparation
Provide the following instructions.
a) THIS HEDGE TRIMMER CAN CAUSE SERIOUS INJURIES.
Read the instructions carefully for the correct handling,
preparation, maintenance, starting and stopping of the hedge
trimmer. Become familiar with all controls and the proper use of
the hedge trimmer.
b) Never allow children to use the hedge trimmer.
c) Beware of overhead power lines.
d) Avoid operating while people, especially children, are nearby.
e) Dress properly! Do not wear loose clothing or jewellery, which
can be caught in moving parts. Use of sturdy gloves, non-skid
footwear and safety glasses is recommended.
g) If the cutting mechanism strikes any foreign object or the
hedge trimmer starts making any unusual noise or vibration,
shut off the power source and allow the hedge trimmer to stop.
Remove the battery pack and take the following steps:
- inspect for damage;
- check for, and tighten, any loose parts;
- have any damaged parts replaced or repaired with parts having
equivalent specifications
ENGLISH
5