Publicidad
Idiomas disponibles
Idiomas disponibles
10.3 With LATCH
Use vehicle belt (not LATCH connectors) for
installations with children weighing more than
48 pounds (21.7 kg). NOTE: Some vehicle
ratings for LATCH anchors, so you must
consult your vehicle owner's manual or call the
vehicle manufacturer to confirm the limits on your
vehicle's LATCH anchors.
1. Unhook LATCH from storage bars on the
LATCH
2. Place the child restraint firmly against the back
of a forward-facing vehicle seat.
3. Hook LATCH Connectors to vehicle lower
anchors
. Pull firmly on Connectors
to be sure they are attached. Belt must
lay flat and not be twisted.
4. Tighten LATCH by pushing down hard on
child restraint and pulling the adjustment belt
.
5. If you need to remove LATCH to readjust,
push button on LATCH buckle
to loosen strap.
30
Publicidad
