Rear-Facing Installation With Latch - Graco ComfortSPORT Manual De Instrucciones

REAR-FACING
1
LATCH belt must be routed through opening in
child restraint for
(see page 29, fig. d
Belt must lay flat and not be twisted.
2
Adjust child restraint to recline position
(see fig. a and page 25, fig. g
rear-facing
LATCH anchors.
3
For ease of installation, extend
maximum length.
4
(fig. b). Pull connectors to be sure they are
securely attached to the anchor points. (fig. c).
5
while pulling LATCH
12
INSTALLATION WITH
rear-facing mode.
LATCH belt to its
adjustment belt. (fig. d).
LATCH
6
tight and does not slip from the tightened
position. If it does not stay tight, try another
7
Vehicle must
Ball MUST be entirely in green zone (fig. f). If
necessary, place rolled towels under child
DO NOT use tether
child.
(fig. e)
rear-facing must