Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION
W A R N I N G
Read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious personal injury.
W A R N I N G
When using this product, basic precautions should always be followed.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
•
To reduce the risk of injury, close supervision is necessary when a product is used near
children.
•
Be thoroughly familiar with controls. Know how to stop the product and release pressure
quickly.
•
Stay alert and exercise control. Watch what you are doing and use common sense. Do not
operate the product when you are tired. Do not rush.
•
Do not operate the product while under the influence of drugs, alcohol, or any medication.
•
Keep the area of operation clear of all people, particularly small children, and pets.
•
Don't overreach or stand on unstable support. Keep proper footing and balance at all times.
•
Follow the maintenance instructions specified in this manual.
W A R N I N G
Risk of injection or injury – Do not direct discharge stream at people or animals.
EXTENSION CORDS
•
When using a power tool at a considerable distance from a power source, be sure to use
an extension cord that has the capacity to handle the current the product will draw. An
undersized cord will cause a drop in line voltage, possibly resulting in overheating, loss
of power, and/or damage to circuit breaker. Use the chart to determine the minimum
wire size required in an extension cord. Only round jacketed cords listed by Underwriter's
Laboratories (UL) should be used. When working outdoors with a product, use an extension
cord that is designed for outside use. This type of cord is designated with "WA" or "W" on
the cord's jacket. Before using any extension cord, inspect it for loose or exposed wires and
cut or worn insulation. It is possible to tie the extension cord and power cord in a knot to
prevent them from becoming disconnected during use. Make a knot, then connect the plug
end of the power cord into the receptacle end of the extension cord. This method can also
be used to tie two extension cords together.
W A R N I N G
To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch
plug with wet hands.
W A R N I N G
Check extension cords before each use. If damaged, replace immediately. Never use the product
with a damaged cord since touching the damaged area could cause electrical shock, resulting in
serious injury.
W A R N I N G
Keep the extension cord clear of the working area. Position the cord so that it will not get caught
on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so
can result in serious personal injury.
• Know your product. Read the operator's manual carefully. Learn the machine's applications
3
Publicidad
