Safety instructions
The electrical plug must
remain
accessible
installation.
— It must be possible to
disconnect the appliance from the
power supply, either using a plug
or by fitting a switch on the fixed
wiring system in accordance with
installation rules.
— If the power cable is damaged,
it should be replaced by the
manufacturer, its after-sales
service department or by a
similarly qualified person in order
to avoid danger.
— This appliance may be installed
either under a worktop or in a
cabinet column, as indicated on
the installation diagram.
— Centre the oven in the unit so
as to ensure a minimum distance
of 10 mm between the appliance
and the surrounding unit. The
material of the unit supporting the
appliance must be heat-resistant
(or covered with a heat-resistant
material). For greater stability,
attach the oven to the unit with 2
screws through the holes provided
on the side panels.
— In order to avoid overheating,
the appliance must not be installed
behind a decorative door..
— This appliance is designed to
be used for domestic and similar
applications such as:
Kitchen areas for the staff of shops,
offices and other professional
after
premises; Farms; Use by clients
of hotels, motels and other
residential type establishments;
guest house type environments.
— The oven must be turned off
when cleaning inside the oven.
Do not modify the characteristics
of this appliance; doing so could
be dangerous.
Do not use your oven as a larder
or to store any items after use.
5