Publicidad
Idiomas disponibles
Idiomas disponibles
How to use your appliance
Cleaning
CLEANING INSIDE - OUTSIDE
• Self-cleaning of the cavity
The oven is made up of two walls covered with a special microporous enamel which gives the oven its
self-degreasing qualities. To start the cleaning process, set the lever to the positionn
countdown begins
• Cleaning the outer surfaces
Use a window washing product applied to a soft cloth. Do not use abrasive creams or scouring sponges.
REMOVING THE SHELF SUPPORTS AND REPLACEMENT OF CATALYTIC WALLS
Lift the front part of the wire shelf support upwards. Press the entire shelf support and release the front
hook from its housing. Then gently pull the whole of the support towards you to release the rear hooks
from their housing.
Pull out the two shelf supports and the catalytic converter walls. Replace the new elements (walls) by
carrying out the operations in reverse.
• Cleaning the inside glass
Warning
Do not use scouring cleaning products, abrasive sponges or metal scrapers to clean the oven's
class door, which may scratch the surface and lead to the glass breaking.
To clean the inside glass, remove the door. Before doing this, remove any excess grease with a soft cloth
and washing up liquid.
• Cleaning the inside glass
Open the door fully and block it with the plastic wedge provided in your appliance's plastic pouch.
Use a tool (screwdriver) to press the slots A in order to unclip the glass panel. Remove the glass panel.
Important :
Make sure to mark the mounting direction of this first window (shiny side towards you).
. A 30-minute
17
Publicidad
