Publicidad
Idiomas disponibles
Idiomas disponibles
Commissioning
3.4 Setting the Parameters
3. To create site name use the <Up/Down> and <Right Arrow> to select a name.
4. Trigger <ENTER> sensor to save the Site name.
①
②
③
Note
To set English or Metric units: In Meter Type Menu, scroll to Meter Facilities Menu. Press
<Right Arrow> and select desired units. Press <ENT> to select. Press <Left Arrow> and
<Up Arrow> to return to Meter Type Menu.
Note
To select alpha-numeric characters: Press <Right Arrow> to cursor and then trigger
<Up/Down Arrow> to select letters and numbers. Trigger <ENTER> when done
5. Trigger <Left Arrow> and return to [Channel Setup]. Trigger <Down Arrow> to select
[Pipe Data].
Select Pipe Class
1. Trigger <Right Arrow> to select [Pick Pipe Class].
2. Trigger <Right Arrow> again. Trigger the <Up/Down Arrows> to scroll to desired Pipe
Class.
3. Trigger <ENTER> to select Pipe Class.
4. Trigger <Right Arrow> sensor. Trigger <Up/Down Arrows> to scroll to select desired Pipe
Size.
5. Trigger <ENTER> to save Pipe Size selection.
24
All manuals and user guides at all-guides.com
Note site name field is initially blank.
(?) indicates cell is ready to accept data. Cursor shown at 1st character position.
Insert desired name (8 Characters max.)
Operating Instructions (Compact), 12/2008, CQO:QSG010 Revision A
SITRANS FUH1010 Quick Start
Publicidad
