Siemens 7ME3601-4 Guía Rápida página 29

6. Trigger <Right Arrow> sensor.
7. Trigger <Down Arrow> and scroll to [D1H]. Trigger <ENTER> to select.
8. IMPORTANT: Record Number Index and Spacing Method. Trigger <Down Arrow> as
needed to locate data.
9. Transducers can now be mounted.
①
②
③
Transducer Identification
The transducer part number located on the front face provides a detailed identification. For
example, the
①
②
③
④
Note
Check to make sure that the transducers are a matched set with the same serial numbers
and marked with an "A" and "B" (e.g., 19256A and 19256B).
SITRANS FUH1010 Quick Start
Operating Instructions (Compact), 12/2008, CQO:QSG010 Revision A
All manuals and user guides at all-guides.com
Select based on type.
Select based on size.
After transducer is mounted select "Install."
Part Number: 1011HNFS-D1HUT1-S2
Model
Hi Precision
NEMA w/F-Conn
Pipe Material
3.4 Setting the Parameters
means:
⑤ Size
⑥ Temperature
⑦ Agency Approved
Commissioning
27