Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
Hold back the collar at the other end of the hose
(H). Push firmly to connect hose fitting to spray gun
(I). Twist collar clockwise to secure. Confirm hose is
locked into spray gun by slightly pulling on them.
To remove the hose, twist collar counter clockwise
then pull back to release the hose (H) connection
from the spray gun (I).
To lock the trigger of the spray gun (I), aim the gun
away from you and pull up on the safety lock (J).
After doing so, squeeze or pull the trigger to make
sure it is locked and will not move. ALWAYS keep
spray gun (I) locked when not in use.
8
Publicidad
