Descargar Imprimir esta página

Tectro CS 825 Instrucciones De Uso página 45

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Remote control
The remote control sends signals to the system.
To set or deactivate the SLEEP mode
To select the TIMER function.
To select the operating mode:
Feel, Cooling, Dry, Fan and Heating
DOWN BUTTON (TOO HOT BUTTON)
To decrease the set room temperature
and reduce the time.
Note: Every mode and the relevant functions will be specified hereafter.
Placement of batteries
Remove the battery cover in the direction of the arrow.
Insert new batteries as shown (align the positive (+) and negative (-) symbols.
Slide the battery cover back in position.
Note: use 2 LR03 AAA(1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with batteries
of the same type (see above) if the display becomes more blurred.
Storage of the remote control and tips for using
The remote control can be stored in a holder, mounted against the wall.
Using the remote control
Point the remote control towards the receiver on the indoor unit of the air conditioner. This way, the air
conditioner can be operated from a distance up to 7 meter.
SLEEP BUTTON
TIMER BUTTON
MODE BUTTON
UP BUTTON (TOO COLD BUTTON)
To increase the set room temperature
and lengthen the time.
FAN SPEED CONTROL BUTTON
To select the fan speed of the indoor unit:
automatic, high, medium and low.
CONTROL BUTTON
(HORIZONTAL
To set the direction of the air flow.
ON/OFF BUTTON
To turn on or off.
4
45
BLADE)

Publicidad

loading

Este manual también es adecuado para:

Ts 825Ts 832Cs 832Ts 848Tscs 1025Tscs 1032