JVC KD-A605 Manual De Instrucciones página 18

Listening to the satellite radio
Before operating, connect either one of the following (not supplied) to the CD changer jack on the rear of this unit.
• JVC SIRIUS satellite radio System, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the
SIRIUS Satellite radio.
• XM satellite radio System, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to
the XM Satellite radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. "UPDATING" flashes and no sound can
be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your satellite radio.
Activate your SIRIUS subscription after
connection
1
2
SIRIUS Satellite radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite radio tunes in to
the preset channel, CH184.
3
Check your SIRIUS ID, see page 27.
4
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-539-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
18
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
1
2
XMDirect ™ Tuner Box or XMDirect2 Tuner System
starts updating all the XM channels. "Channel 1" is
tuned in automatically.
3
Check your XM Satellite radio ID labelled
on the casing of the XMDirect ™ Tuner Box
or XMDirect2 Tuner System, or tune in to
"Channel 0" (see page 19).
4
Contact XM Satellite radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).