Publicidad
Idiomas disponibles
Idiomas disponibles
Symptoms
• The iPod does not turn on or does not work.
• The sound is distorted.
• No sound can be heard in "IPOD MODE."
• Playback stops.
• "CANNOT PLAY" appears on the display.
• "RESTRICTED" appears on the display.
• "NO FILES" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• "NO IPOD" appears on the display.
• No sound can be heard when connecting
an iPod nano.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class
device while using this System.
40
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version of the iPod/
iPhone.
• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
• Check whether "IPOD SWITCH" setting is
appropriate (see page 29).
Deactivate the equalizer either on this unit or the
iPod/iPhone.
Check whether "IPOD SWITCH" setting is
appropriate (see page 29).
The headphones are disconnected during
playback. Restart the playback operation (see
pages 20 and 21).
No tracks are stored. Import tracks to the
iPod/iPhone.
Check whether the connected iPod/iPhone is
compatible with this unit (see pages 33 and 34).
No tracks are stored. Import tracks to the iPod.
Reset the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
• Disconnect the headphones from the iPod
nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from both this unit and
iPod. Then, connect it again.
Check the connection between the adapter and
this unit.
Publicidad
